We are a globally recognized trader and exporter of optimum quality Polyetheretherketone Rodsthat are acknowledged for their use in hot water without any permanent loss in physical properties. The offered rods are designed and manufactured by our vendors using the best grade polyetheretherketone material and advanced technology. These Polyetheretherketone Rodsare available in different lengths and thicknesses as per the diverse needs of clients. Provided rods are quality tested by our vendors to eradicate any kind of flaw prior to dispatch from their end.
Features:
High strength
Fine finish
Light weight
Durability
Material description
Semi-crystalline thermoplastic
DIN EN ISO 1043-1: PEEK | polyetheretherketone
High-performance plastics
Material properties
Excellent dimensional stability
Extremely high flame resistance
Self-extinguishing
Very low smoke emission in a case of a fire
Minimal absorption of moisture
High purity
Very good resistance to gamma- and x-ray-radiation
Good sliding properties
High wear resistance
Can be easily deep drawn
Low distortion when under mechanical loads
Is resistant to very high impact loading
Outstanding high mechanical strength and hardness over a broad temperature range
Despite high temperatures and mechanical load, the material is only modestly distorted
Can be in contact with food (FDA)
Technical Data:
General properties
Density
1.32
g/cm3
DIN EN ISO 1183-1
Flammability
V0/V0
3 mm / 6 mm
UL 94
Absorption of moisture
0.20
%
DIN EN ISO 62
Mechanical properties
Yield stress/ tensile strength
110
MPa
DIN EN ISO 527
Tensile elongation
20
%
DIN EN ISO 527
Tensile modulus of elasticity
4,000
MPa
DIN EN ISO 527
Notched impact strength (Charpy)
5
kJ/m2
DIN EN ISO 179
Ball indentation hardness
230
MPa
DIN EN ISO 2039-1
Shore hardness
88
Skala D
DIN EN ISO 868
Thermal properties
Melting temperature
343
C
ISO 11357-3
Thermal conductivity
0.25
W / (m K)
DIN 52612-1
Specific thermal capacity
1.34
kJ / (kgK)
DIN 52612
Coefficient of linear thermal expansion
50
10-6 K-1
DIN 53752
Service temperature, long term (min.)
-60
C
Benchmark
Service temperature, long term (max.)
250
C
Benchmark
Service temperature, short term
31
C
Benchmark
Heat deflection temperature
152
C
DIN EN ISO 75 (HDT A)
Electrical properties
Dielectric constant
3.20
DIN IEC 60250
Dielectric dissipation factor
0.001
DIN IEC 60250
Specific volume resistivity
4.9 1016
cm
DIN IEC 60093
Surface resistivity
1018
DIN EN 60093
Dielectric strength
20
kV/mm
DIN EN 60243
Tell us about your requirement
Price:
Quantity
Select Unit
50
100
200
250
500
1000+
Additional detail
Mobile number
Email
Confirm Your Requirement
Verification Code
Did not receive yet?
Resend OTP
Youre Done!
We have received your requirements and will reply shortly with the best price.
Send Inquiry
Send Inquiry
Send SMS
